UTP Extension

A 4915 • 2 Input Mini Mixer With Vox Muting (XLR)

This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input.

A 4962 • Supermarket PTT Microphone Transceiver

Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate.

A 4960 • 5 Pin XLR Supermarket Microphone Transmitter Wallplate

Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate.

A 4946 • RCA To Cat5 UTP Extender (Receiver)

The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors. The output volume is screwdriver adjusted via the trimpot on the front of the unit.

A 4944 • RCA To Cat5 UTP Extender (Transmitter)

The Redback A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.

A 4937 • 3 Input XLR Mic/Line Pre-Amplifier Bluetooth Wallplate

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.

A 4935 • 3 Input XLR Mic/Line Pre-Amplifier Wallplate

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. It also connects to the Redback A 4480B directly allowing multiple microphones to be connected to a single zone input. All audio inputs are mixed with individual level controls.

A 4941 • 3 Pin XLR Transmitter Wallplate

This 3 pin XLR UTP transmitter wallplate sends signals to compatible Redback UTP solutions receivers. It converts a balanced XLR signal to an RJ45 connection suitable for transmission over Cat5/6 UTP cabling.

A 4953 • 5 Pin XLR Transmitter Wallplate

This 5 pin XLR UTP transmitter sends signals to compatible Redback UTP solutions receivers and converts the signal to a balanced XLR output with PTT connection.

A 4954 • 5 Pin XLR Cat5 Extender (Receiver)

This 5 pin XLR UTP receiver accepts signals from compatible Redback UTP solutions transmitters and converts the signal to a balanced XLR output with PTT connection. Connects to a suite of Redback UTP products.

A 4952 • 5 Pin XLR Cat5 UTP Extender (Transmitter)

This 5 pin XLR UTP transmitter sends signals to compatible Redback UTP solutions receivers. It converts a balanced XLR signal with PTT to an RJ45 connection suitable for transmission over Cat5/6 UTP cabling. Connects to a suite of Redback UTP products.

A 4940 • 3 Pin XLR Cat5 UTP Extender (Transmitter)

This handy interface box provides a convenient way to send low level audio signals over long distances via Cat5/6 cabling. The unit has adjustable input sensitivities to handle either microphone (3mV) or line levels (1V) and has provision for phantom power (15V DC).