Fire & Evacuation

A 4567C • 10 Zone Line Monitoring Unit

Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Traditional line monitoring units were limited to 50W per zone and would not handle this load. The A 4567B can handle loads up to 500W per zone.

A 4582 • 10 Zone Monitor Panel

A handy aid to test and adjust 100V line PA amplifier output levels. Capable of monitoring 10 individual amplifiers (electrically isolated from each other to prevent cross talk). Audible and visual monitoring is available from the built in speaker and VU meter.

A 4568 • Zone Status Interface To Suit A 4567B

Designed to interface the A 4567B Line monitoring unit with a fire indicator board. The addition of the A 4568 enables you to monitor the status of each individual zone.

A 4566 • In-Line 22uF Speaker line Isolator Box

This module has been designed to monitor the integrity of 100V Line speaker circuits. It is connected between the amplifier output and the speaker circuit. The module will detect one of three speaker line conditions. (Normal, Short Circuit or Open Circuit).

A 4500C • 24 Hour 7 Day Timer With Evac Tone Generator

A versatile timer which has four switched 24V outputs and four closing contacts which activate simultaneously. It permits a total of 50 event switching times.

A 2070B • Tone Generator Alert/Evac With Voiceover Chip

Containing both the alert & evacuation tones based on Australian standard this compact self contained module will integrate with most PA amplifiers. Tones conform to AS1670.4.

A 4596 • Paging Console With Lockdown Control

A paging console for making announcements with the addition of lock down control functions including lock in, lock out, standby and all clear functions. Emergency paging is also catered for.

A 4576 • 1 Zone Universal Remote Alarm Wallplate

Designed for both 12V and 24V operation, this wallplate will sound a buzzer and illuminate an LED indicator when activated. A cancel button allows buzzer to be switched off, whilst the LED remains on.

A 4577 • 6 Zone Universal Remote Alarm Wallplate

Designed to operate on 12 to 30VDC. This six input wall plate will sound a buzzer and illuminate a specific LED when an input is activated/triggered by a closing contact.

A 2081 • Remote Control Wallplate to suit Alert/Evac Controller (Screw Terminal)

Allows the A 4574, A 4500A and A 4565 units to be activated remotely. Featuring alert, evacuation, chime and cancel buttons with protective “flip up” covers to prevent accidental operation.

A 2078B • Remote Control Wallplate to suit Alert/Evac Controller (Screw Terminal)

Allows the A 4565 unit to be controlled remotely. Featuring alert, evacuation and cancel buttons with protective “flip up” covers to prevent accidental operation. Connects to main A 4565 unit via multi core cable (6 core).

A 4578 • Remote Control Wallplate to suit Alert/Evac Controller

Allows the A 4565 alert/evac unit to be activated remotely. Featuring alert, evacuation and cancel buttons with protective “flip up” covers to prevent accidental operation.