C 0351A • Professional Electret Boundary Microphone

Commonly used to pick up a full room of sound by being mounted on a wall. High sensitivity electret design. Requires phantom power.

SKU: C 0351A Categories: ,
Overview

This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/off switch allows quick activation when required. Rear panel selections include talk/lock/mute switch, filter switch (0db/-10dB) and polar pattern selection (cardioid, figure 8, variable, omni). Requires 48-52V dc phantom power. Mini XLR 3 pin balanced output. Includes 3 metre mini XLR to 3 pin XLR male lead.

Key Features:

  • Touch Sensitive Switch with blue LED to indicate when mic is on.
  • Three operating mode switch, Talk/Lock/Mute.
  • Polar pattern switch.
  • Filter switch, flat/low-cut.
  • Sleek design&rugged construction.
  • Phantom powered.
  • High quality sound.
  • Rubber non-slip base.
  • Supplied with 3m mini female XLR to male XLR cable.

 

Specifications
Insert: BackElectret – Condenser
Polar Pattern: Line + Gradient
Impedance: 200 Ohm balanced
Open Circuit Sensitivity: -60dB ±3dB
Frequency response: 30Hz – 18kHz
Maximum SPL: 119dB (1kHz @ 1% THD)
Dynamic Range: 89dB (1kHz at 1Pa)
Signal to Noise: 64dB (1kHz @ 1Pa)
Operating Voltage: Phantom power 9V – 52V DC, 2mA typical
Output Connector: Integral 3-pin XLR Male
Dimensions: Ø19 x 288mm
Included Accessories: Windscreen
Order Enquiry









Documents