A 4047 • Phase5 100W 3 Input 100V Public Address Amplifier
Powered from 240V AC mains or 24V DC permitting battery backup operation during mains power failure. Output is 100V line, 70V line or low impedance operation is available with internal configuration. All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.
A 4573 Alert/evac option board: When fitted, generates pre chime, bell, alert and evacuation tones. The alert tone can function continuously, or switch to evac tone after a preset time delay (adjustable 30 seconds to 4.5 minutes). Simply connects to the amplifier internally via the cable provided.
A 4373 Digital remote volume option board: When fitted and used in conjunction with A 2280B wallplate to provide remote volume level adjustment. Ideal for situations where the amplifier is located in a remote rack.
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output (4-16Ω/70V by request)
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
Developed, designed & assembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support.
Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service.
Power Output: 100 watts RMS
Distortion: < 0.5% @ 1kHz Signal to Noise Ratio: Typically 75dB below rated output. All inputs. Frequency Response
Mic inputs: 50Hz – 10kHz, -3dB
Line inputs: 60Hz – 15kHz, -3dB
Output line: 100V (4-16Ω/70V by request)
Mic 1-3: 3mV
Line inputs 1-3: 300mV
Speakers: Screw terminals
Mic 1-3: 3 pin XLR balanced
Line inputs 1-3: RCA stereo socket
24V DC power: Screw terminals
240V AC power: IEC power connector
VOX Muting: 60dB below rated output
Remote volume: Screw terminals
Mic inputs: Volume
Line inputs: Volume
Bass: ±10dB @ 100Hz
Treble: ±13dB @ 10kHz
Power: On/off switch
Indicators: Power, Overload
Power supply: 240V AC or 24V DC
Current Draw: 220mA Standby, 7A Full @ 24V DC
Protection: 4A AC fuse and 8A DC fuse
Weight: ≈9 kg
Dimensions: ≈423W x 225D x 88H mm