C 2261 • 100mm (4”) 100V 5W Metal Low Profile Ceiling Fire Speaker Black AS ISO7240.24
This range of speakers have been engineered to meet the requirements of evacuation and occupant warning paging systems. The high efficiency speaker and transformer combination ensures high SPL, wide frequency response, superior speech intelligibility and reproduction for mission critical applications. All components of the fixture are manufactured from high quality, long lasting, flame retardant material and tested to the rigours of the new standard. On site installation will be simple and straight forward. Oversized cable glands and terminal blocks will make on site termination easier than other competing products. Finally the speaker will just ‘snap fit’ into the ceiling. Far easier than competitors models being offered on the market.
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Low profile design is only 65mm deep – penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted flame retardent safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
The Labour Saving One-Shot® Mounting System
Redback® “One-Shot®” speaker units install in seconds providing substantial labour cost savings for the professional installer compared to traditional mounting methods. The “Rat-Trap” version is the first “One-Shot®” to utilise a retaining 3 way spring latching system. Each latch is set like a rat trap before installation into the speaker hole. When the speaker is pushed into the ceiling, the latches spring open, securing the speaker in place. The snap clip material is formulated to retain long service life strength and spring action, ensuring a firm vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings. A neutral white RAL colour provides an architecturally unobtrusive finish to virtually any installation.
Backed by an industry leading 5 Year Speaker Performance Warranty.
This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.
Power taps: 0.33, 0.66, 1.25, 2.5, 5W
Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
SPL 1W @ 1m: 89dB
SPL 1W @ 4m: 77dB
SPL 5W @ 1m: 96dB
SPL 5W @ 4m: 84dB
Frequency response: 100Hz – 15kHz
Coverage Angles: 1000Hz 180°, 2000Hz 160°, 4000Hz 75°
Connection: 4 way terminal block + 22uF bipolar capacitor
Approval: AS ISO7240.24
Environmental Type: A (for indoor applications)
Black flame retardant ABS grille (ABS AF312C)
Clear Flame retardant ABS spring clips (Makrolon 6557)
Red flame retardant ABS transformer dome cover (Starex VH-0800)
Powdercoated aluminium grille insert
Driver construction: Paper cone
Ceiling cutout: 140mmØ
Grille diameter: 159mmØ
Mounting depth: 61mm (including ceiling tile thickness)
Overall weight: 650g
Operating temperature: -25°C to +55°C
Relative humidity: < 95%