C 2170 • 100mm (4”) 100V 5W Ceiling Fire Speaker White AS ISO7240.24

Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements.

Overview
This range of speakers have been engineered to meet the requirements of evacuation and occupant warning paging systems. The high efficiency speaker and transformer combination ensures high SPL, wide frequency response, superior speech intelligibility and reproduction for mission critical applications. All components of the fixture are manufactured from high quality, long lasting, flame retardant material and tested to the rigours of the new standard.  On site installation will be simple and straight forward. Oversized cable glands and terminal blocks will make on site termination easier than other competing products. Finally the speaker will just ‘snap fit’ into the ceiling. Far easier than competitors models being offered on the market.

 Key Features:

  • Designed to meet Australian Standard AS ISO7240.24
  • Excellent speech intelligibility
  • Tuned PA driver designed to meet the latest fire standards
  • High quality speaker driver developed for BGM, paging and emergency warning applications
  • Patented 3 way latching ensures a neat, sag free installation.
  • Fitted with 4 way wire protect terminal for loop in, loop out wiring.
  • Fitted with flame retardent safety cover.
  • Fitted with supervisory capacitor for line monitoring.
  • Assembled in Australia.
  • 5 year warranty.

 

SPL Output Table @ 1m

Model 1W 0.33W 0.66W 1.25W 2.5W 5W
C 2170 90dB 85.2dB 88.2dB 91.2dB 94dB 97dB

The Labour Saving One-Shot® Mounting System

Redback® “One-Shot®” speaker units install in seconds providing substantial labour cost savings for the professional installer compared to traditional mounting methods. The “Rat-Trap” version is the first “One-Shot®” to utilise a retaining 3 way spring latching system. Each latch is set like a rat trap before installation into the speaker hole. When the speaker is pushed into the ceiling, the latches spring open, securing the speaker in place. The snap clip material is formulated to retain long service life strength and spring action, ensuring a firm vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings. A neutral white RAL colour provides an architecturally unobtrusive finish to virtually any installation.




5-year-warrantyBacked by an industry leading 5 Year Speaker Performance Warranty.
This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.

Specifications
Electrical
Power taps: 0.33, 0.66, 1.25, 2.5, 5W
Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
SPL 1W @ 1m: 90dB
SPL 1W @ 4m: 78dB
SPL 5W @ 1m: 97dB
SPL 5W @ 4m: 85dB
Frequency response: 100Hz-15kHz
Coverage Angles: 1000Hz 182°, 2000Hz  163°, 4000Hz  77°
Connection: 4 way terminal block + 22uF bipolar capacitor
Approval: AS ISO7240.24
Environmental Type: A (for indoor applications)

Mechanical
Material:
White flame retardant ABS grille (Taitalac 8540T)
Clear Flame retardant ABS spring clips (Makrolon 6557)
Red flame retardant ABS transformer dome cover (Starex VH-0800)
Driver construction: Paper cone
Ceiling cutout: 140mmØ
Grille diameter: 159mmØ
Mounting depth: 117mm (including ceiling tile thickness)
Overall weight: 700g

Environmental
Operating temperature: -25°C to +55°C
Relative humidity: < 95%
IP Rating: IP21

 

Order Enquiry