C 2173 • 100mm (4”) 100V 10W Ceiling Fire Speaker Black AS ISO7240.24

10W high SPL version of the C 2171 EWIS One-Shot speaker. Designed to meet AS ISO 7240.24:2015 (approval pending). Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements.

This range of speakers have been engineered to meet the requirements of evacuation and occupant warning paging systems. The high efficiency speaker and transformer combination ensures high SPL, wide frequency response, superior speech intelligibility and reproduction for mission critical applications. All components of the fixture are manufactured from high quality, long lasting, flame retardant material and tested to the rigours of the new standard.  On site installation will be simple and straight forward. Oversized cable glands and terminal blocks will make on site termination easier than other competing products. Finally the speaker will just ‘snap fit’ into the ceiling. Far easier than competitors models being offered on the market.

 Key Features:

  • Designed to meet Australian Standard AS ISO7240.24 (approval pending)
  • 10W high power transformer for installations requiring increased SPL
  • Excellent speech intelligibility
  • Tuned PA driver designed to meet the latest fire standards
  • High quality speaker driver developed for BGM, paging and emergency warning applications
  • Patented 3 way latching ensures a neat, sag free installation.
  • Fitted with 4 way wire protect terminal for loop in, loop out wiring.
  • Fitted with flame retardent safety cover.
  • Fitted with supervisory capacitor for line monitoring.
  • Assembled in Australia.
  • 5 year warranty.


The Labour Saving One-Shot® Mounting System

Redback® “One-Shot®” speaker units install in seconds providing substantial labour cost savings for the professional installer compared to traditional mounting methods. The “Rat-Trap” version is the first “One-Shot®” to utilise a retaining 3 way spring latching system. Each latch is set like a rat trap before installation into the speaker hole. When the speaker is pushed into the ceiling, the latches spring open, securing the speaker in place. The snap clip material is formulated to retain long service life strength and spring action, ensuring a firm vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings. A neutral white RAL colour provides an architecturally unobtrusive finish to virtually any installation.

5-year-warrantyBacked by an industry leading 5 Year Speaker Performance Warranty.
This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.

Rated Noise Power: 10 Watts (100V line)
Power Taps & Impedance (100V line): 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ), 7.5W (1.3kΩ), 10W (1kΩ)
Sensitivity: 90dB (1W @ 1m), 78dB (1W @ 4m)
Maximum Sound Pressure Level: 99dB (10W @ 1m), 87dB (10W @ 4m)
Frequency Response: 100Hz – 15kHz; 500Hz-4kHz: 0±12dB
Coverage Angle (-6dB): 500Hz: >180°, 1000Hz: 174°, 2000Hz: 160°, 4000Hz: 80°
Environmental Type: A (for indoor applications as per standard)
Speaker Component: 100mm (4”) paper cone speaker
Mounting Hole: 140mmØ
Mounting Method: 3 x plastic spring loaded clip
Line Monitoring: Yes, 22µF bipolar capacitor
Applicable Cable: 2.5mm2 (14AWG) max conductor area
Connection: 4 way screw terminal
IP Rating: IP21C
Dimensions: 159Ø x 122Dmm
Weight: 1.15kg
Order Enquiry